HSG-1-VW Heat Cutter  - Small unit with temperature control, suitable for a more continuous cutting operation. It is designed to cut & seal synthetic fabric, cords, ropes, webbing, and belts. Blades heat up in approx. 6-8 seconds. Blade temperature: 0 – 1100 degrees Fahrenheit. The HSG-1-VW is the first step up from an HSG-0 unit for a more continuous use manual operation. The 160 watt transformer for this unit is installed in the unit box that sits on a table, making the handle lighter. On the unit box you have an on/off switch and a dial to control the heat of the blade after the trigger is pressed. This unit comes standard with a 2 meter (6.56 ft.) cable running from the unit box to the Type M handle where the blade is installed. Install your preferred blade into the Type M handle, plug in the power cord into a 110 volt outlet, set the dial to the recommended setting for your particular blade listed in the owner’s manual, turn on the unit with the on/off switch and you're ready to cut and seal synthetic fabric/rope/webbing in a production atmosphere. A variety of different style HSGM blades are sold separately.

Made in Germany.

Technical Description:

 Heats up in only 6-8 seconds 

Infinitely variable working temperature 

Working temperature 600°C (1110°F) max. 

Supply voltage: 230 - 50Hz (110V - 60Hz) 

Power input: 160 Watt max. 

Continuous operation 

Illuminated rocker switch 

Supply cord 2 m, with European-type plug (US-type plug). 

Class I protection 

Dimension: 155 x 220 x 105 mm 

Weight: 5.8 kg (12.8lbs)